Traditionally, SeaBat deepwater sonars have been known for being quite difficult to move around, but that is about to change as Teledyne RESON has built a portable SeaBat 7150. The entire system is built into a container making it the world’s...

SeaBat T50-P是SeaBat T系列产品的新成员。得益于T系列从底层硬件展开的新一代可扩展性设计，搭配便携式声纳处理器，SeaBat T50-P为您带来卓越的测量数据，且简单易用，可有效减轻数据处理负担。 超高分辨率便携式多波束测深仪SeaBat T50-P完整支持190至420kHz的工作频率灵活变换，可以在严酷的测量环境下提升扫宽表现，节省测量耗时成本。 SeaBat...

This movie demonstrates the Teledyne PDS Vessel Contour Editor.

The SeaBat T50-P is the new addition to the leading SeaBat T-series product range engineered from the ground up to evolve with your business. Combined with the Portable Sonar Processor the SeaBat T50-P provides unprecedented survey data, providing...

High resolution structural inspection of flooded tunnel using BlueView T2250 360° Multibeam Profiling Sonar and Teledyne PDS.

Michael Redmayne from Caris gives his view on the usage of Autonomous Surface Vessels from the Underwater Technology Conference held in Boston, September 2014. How are the dynamics of survey platforms changing? Are we seeing a shift into using...

Innovative and reliable power, communication, and sensing solutions for harsh environments.

Teledyne Cable Solutions, an alliance formed of Teledyne Storm Cable and Teledyne VariSystems, provides bulk wire and cable, and custom overmolded cable assemblies to the oil and gas, marine, defense, and transit industries. With over 50 years of...

Deep Tow Project Part III – Installation at Odyssey Marine ExplorationTeledyne Benthos and Teledyne RESON are developing a new deep tow vehicle for Odyssey Marine Exploration. The vehicle is equipped with a SeaBat 7125 Multibeam Dual Head Sonar...

This movie demonstrates the Teledyne PDS GapFill application.

This movie demonstrates the Teledyne PDS Numerics view and Numeric layers.

An introduction to Teledyne RDI's Water Resources product line.

This movie demonstrates how to set-up and the use of VDatum in Teledyne PDS.

At our Underwanter Technology Seminar (UTS) in Hamburg, September 2014, Deputy Haven Master (Conservancy) Port of Bristol, Mark Burrows presented how the Port of Bristol deals with large amount of fluid mud in the port area with the following...

Read the article: Route Steering feature saved substantial time during pipeline monitoring survey in the Caspian Sea

Q-View Software: How to use it with WinRiver II on previously collected data.

This video walks the user through how to calibrate their Sentinel V ADCP prior to deployment.

Teledyne RESON and Teledyne Optech have recently conducted a series of tests for the Port Authority of New South Wales, combining laser and bathymetric survey into a "seamless surface" experience.

At UTS14 in Boston Mathieu Rondeau from CIDCO and Olivier Ayotte from Geosphair Aviation made a presentation on how to survey the most northern parts of Canada using a plane with an onboard Multibeam Sonar.

This movie demonstrates Teledyne PDS with a BlueView project. It demonstrates the use of the views, making sonar targets, logging data, import BlueView SON files and replay of logged files.

This video gives you an introduction on how to setup a MB1 Multibeam Echosounder with the Teledyne PDS interface.

This movie demonstrates the use of S-57 ENC charts in Teledyne PDS. It demonstrates how to load an ENC exchange set in Teledyne PDS, how to add an S-57 chart layer in a view and how to set the properties of the S-57 chart layer.

This movie demonstrates defining a screen layout and its views for a BlueView Teledyne PDS project. It demonstrates how to add views to a screen layout, how to organize the views by docking them, how to define a numerics view and how to define...

This movie demonstrates the forward looker application in Teledyne PDS. It demonstrates how to setup a demo project with the Teledyne PDS new project wizard, defining a screen layout with the associated views and the use of the Teledyne PDS...

This movie demonstrates defining a screen layout and its views for a BlueView Teledyne PDS project. It demonstrates how to add views to a screen layout, how to organize the views by docking them, how to define a numerics view and how to define...

By Stuart Leather, Business Development Director, ADUS, DeepOcean

Teledyne Oil Gas offers an in-line sensing system for measuring corrosion in subsea and land-based oil pipelines.

Presentation given by Nico van Woerkom, Commercial Director, Teledyne-RESON BV at the Underwater Technology Seminar 2014 in Hamburg. Learn more about Teledyne Marine dredge and construction solutions

A case study from Venice, by Nico van Woerkom, Commercial Director, Teledyne RESON BV presented at The Underwater Technology Seminar in Hamburg 2014. Learn more about Teledyne Marine dredge and construction solutions

his video shows typical use cases of a modern multibeam echosounder, like the HYDROSWEEP of the 3rd generation, on a modern research vessel, like the German research icebreaker POLARSTERN.

The PARASOUND is the most advanced hull mounted parametric sub-bottom profiler in the market. It utilises the parametric effect to generate a low frequency secondary signal by emitting two primary signals of higher frequencies. In comparison...

“Combining Scanning Sonar, Laser Scanning and Mobile Mapping to Provide New Techniques for Bridge and Structure Inspection.” By Tom Card, LandScope Engineering Ltd Summary of paper: With regards to bridges and other underwater structures,...

This movie demonstrates how to setup a BlueView Teledyne PDS project by the Teledyne PDS new project wizard.

A quick introduction to Teledyne RDI's new Q-View data QA/QC software design to operate with TRDI's WinRiver II software for inland ADCP applications. Q-View bridges the gap between the requirement for high-quality field measurements and the...

A quick introduction to Teledyne RDI's new RiverPro ADCP -- the newest member of our growing family of Acoustic Doppler Current Profilers (ADCPs) for inland Water Resources applications. The 1200 kHz RiverPro has been purpose-built to fill two...

Deep Tow Project Part II – Assembling Testing at Teledyne BenthosTeledyne Benthos and Teledyne RESON are developing a new deep tow vehicle for Odyssey Marine Exploration. The vehicle is equipped with a SeaBat 7125 Multibeam Dual Head Sonar and...

Deep Tow Project Part I – Getting started Teledyne Benthos and Teledyne RESON are developing a new deep tow vehicle for Odyssey Marine Exploration. The vehicle is equipped with a SeaBat 7125 Multibeam Sonar and will be used to find shipwrecks on...

This movie demonstrates how to create and edit color tables in Teledyne PDS. It demonstrates how to add a new color table and edit it by the color table generator.

This movie demonstrates how to create and edit runlines in the Teledyne PDS guidance editor. It demonstrates how to create a file, how to add a pattern and how to edit the cross and parallel lines. Furthermore it is demonstrated how to add layers...

With over 25 years of manufacturing echo sounding equipment, Teledyne Odom Hydrographic (formerly Odom Hydrographic Systems) continues its legacy of unwavering dedication to the principles of customer service and product innovation. With over...

A fly trough of the Sydney Harbour sea floor mapping. Credit: www.sydneyports.com.au/ The team responsible for keeping the Harbour’s busy shipping lanes and berths clear of obstacles have now revealed some of the spectacular 3D images of the...

This video walks the user through the configuration options available for the Sentinel V ADCP.

This video walks the user through each of the major hardware components (standard and optional) for the Sentinel V ADCP.

This video shows the user how to locate and fill the pressure sensor installed on their Sentinel V ADCP.

Teledyne RDI Sentinel V General Maintenance Video: Learn how to replace the battery pack in your Sentinel V ADCP

Teledyne RDI Sentinel V General Maintenance Video: Learn how to replace the D-cell batteries in your Sentinel V ADCP

Teledyne RDI Sentinel V General Maintenance Video: Learn how to remove and replace the Sentinel V ADCP End Cap.

Teledyne RDI Sentinel V General Maintenance Video: Learn how to replace the O-ring in your Sentinel V ADCP

Teledyne Oil and Gas provides power, communication, and sensing solutions for harsh environments. Market leaders in subsea oil and gas, Teledyne Oil and Gas excels in developing new connectivity products for deepwater drilling and productions.

Connecting your ADCP to WinRiver II Software This course will cover connecting each ADCP type to WRII. The focus will be on communications, Bluetooth and serial. Also included are troubleshooting techniques. This course also will cover...

Collecting Data Using WinRiver II Software This course will cover collecting ADCP, GPS and Depth Sounder data. The focus will be on the ADCP as previous courses covered GPS and Depth Sounder.

Teledyne RDI WinRiver II Software Introductory Training This course is a high level introduction to WRII designed specifically for new users. It is an overview of the format and function of Teledyne RDI's River discharge software. Concepts...

Winiver II ASCII Input This course will cover selecting items of interest and outputting the data in an ASCII format.